| Larry's profileLarry Doe's Scanner BlogPhotosBlog |  Tools  Help |
|
September 20 Governor and wind motor done100 more piano rolls have been scanned and uploaded to www.iammp.org . The Chickering Ampico pneumatic components are progressing nicely. I have finished the expression cutout, wind motor governor and most of the wind motor itself. About one more day will be needed to finish assembling the wind motor. That will enable the entire drawer to be assembled and tubed. Remaining are the two expression regulators, the primary chest, the stack and the pump. No news from Zeiner & Sons on the piano refinishing. By now, I would imagine some progress will have been made on the hand-rubbed finish and maybe the plate, pinblock and strings are close to happening.
The photos illustrate the method I used to locate the tiny holes in the cancel pneumatic for the return spring. I inserted short common pins into the existing holes in the wood with the sharp end sticking out. The pins pierce the hinge and pneumatic cloth as these are installed. Later, the pins are pulled out with pliers and the spring can easily be inserted.
The photos also show what was likely to be two reasons this piano stopped working. First, the tempo slide had a severe binding condition which, upon disassembling, was found to have been caused by a split in the wooden box. This split probably occurred at the time of manufacture. The bolt hole pattern in the cover did not match the pattern of pre-drilled pilot holes. 6 out of 7 screws matched, but the one odd location probably was not provided with a pilot hole, splitting the wood and pinching the tempo slide valve. The second fault would have occurred later. This being a warped and cracked tempo aperture plate. These were made of celluloid and all go bad eventually. The new one is brass. Some wood came out with the old plate and I had to mill out a shallow pocket and glue in a thin wooden shim to replace the missing material.
I'm in Stowe, Vermont for the next few weeks to install FM transmitters for Vermont Public Radio at the summit of Mount Mansfield. The wind motor will have to wait for my return. TrackbacksThe trackback URL for this entry is: http://doesigns.spaces.live.com/blog/cns!7F5B5518D772B529!2149.trak Weblogs that reference this entry
|
|
|
